The Shaping Machine Also Needs The Cosmetology Maintenance

- Sep 15, 2017 -

Maintenance Method:

1. Cylinder Body (dg1100x6): Welded by steel plate. Cylinder body can not be long-term water (steam cooling), heat-damp stereotypes should be after the cooling water drained clean dry, and regularly check whether the surface of the paint off and rub off, if there is, should be timely to fill with high temperature paint, in order to prevent local corrosion. Note: The vacuum maximum is not more than 0.07MPa (usually above 0.06MPa), in case of instability.

2, Stereotypes machine jacket: from the steel coil welding. For dry heat styling. Mainly carried in the head 45° fold. In the maintenance, according to the drawing requirements of the appearance of a 80-100 mm asbestos cement insulation layer, and after each use will be the jacket inside the cooling water drained.

3, 2 support tube and 11 attachment tube: Check whether the tube is intact when the maintenance, before installing the pipe in the silk buckle on the molybdenum disulfide and other anti-corrosion lubricants, at the flange joints to add cushion, to ensure that all kinds of trachea do not leak, not leak.

4, Stereotypes machine active circle, fixed block, roller, rack, handle and other components: attention to wire or other dirt embedded wheel, affect the rotation. If the wheel is slack, loosen the clamping screws properly.

5, stereotypes machine various pressure gauges, thermometers, safety valves, jacket, vacuum table, and so on: for these instruments, must be used in accordance with the specifications of the model, to achieve the specified scope of measurement and accuracy level, regular inspection of its sensitivity, accuracy, reliability.