The main points of the coating machine's spraying equipment maintenance

- Sep 15, 2017-

1, in the demolition and maintenance work, workers should not wear earrings, watches, necklaces, bracelets and other conductive decorations can prevent accidents.

2. In the maintenance of hot melt adhesive coating machine Before the work, we must first put hot melt adhesive coating machine Power Users and pull out the total power supply to cut off, not live operation.

3. Do not disassemble and check any parts on the hot melt Adhesive coating machine, unless you have enough knowledge about the performance of the equipment.

4, unless there are other personnel in the side to assist, and in the event of accidents, due to mechanical damage or injury of personnel, you can immediately give help or first aid, otherwise do not separate the hot melt adhesive coating machine equipment for disassembly and repair.

5, only qualified personnel can be hot melt adhesive coating machine maintenance work.

6, in any case, do not feel free to touch the outside of the wire connector or other wires are connected and not loose components.

7. Remove or move the protective device on the hot-melt adhesive coating machine or replace the element device before the supply of the power supply must be cut off first.

8, if possible, as far as possible to stand on the plastic blanket maintenance work. Do not maintain the hot melt adhesive coating machine in the flooded floor or in very humid environment.

9, on the hot Melt Adhesive coating machine maintenance and maintenance must wear safety gloves, goggles and long-sleeved overalls, to avoid the body part by High-temperature liquid hot sol scald, or by high-temperature components surface burns.