Textile Stenter Machine in the process of tiling finishing, mainly with a variety of different fibers in the wet state when the plasticity, so the fabric width gradually stretched until the required size, and then drying, so as to make the fabric shape be stable. So this process can usually be called stereotypes finishing.
I believe we all know, in fact, no matter what kind of fabric in the process of manufacturing, will go through a series of processing links. So in this process may be subject to a variety of forces, making the fabric of the elongation, weft contraction, or there are some other defects, such as uneven width, uneven cloth or feel rough Wait. Therefore, in the latter part of the time, in order to make the fabric more neat stable door width, you need to use the Textile Stenter Machine for tenter finishing.
In fact, the use of textile stenter machine in the finishing can be a good solution to the above mentioned defects on the issue. For example, can reduce the deformation of the fabric processing process. Therefore, in order to ensure the quality of the fabric, after the dyeing and finishing process, also need to tenter finishing.
In the process of finishing, in addition to tenter finishing, but also includes finishing and so on. In this session, the fabric can be pre-bake, so that in the latter part of the rolling finishing can be more durable after the luster. Usually the textile stenter machine is composed of three main parts of wetting, tentering and drying, and also equipped with auxiliary devices such as weft.
It should be noted that in the process of operating the textile stenter machine, be sure to choose the appropriate size, because if more than a certain range, then the excessive tenter will cause fabric damage, and its shrinkage rate can not meet the standard.