The application of woven stenter and the basic main components

- Nov 14, 2017 -

Stenter, which is a lot of specific types, however, no matter what kind, its main application industry, is for the textile printing and dyeing industry, that is, textile printing and dyeing plant. Moreover, it is a kind of machinery and equipment, is for a certain purpose, so the following, to learn more about it.

1. Definition and application scope

The definition of a woven stenter machine is such that the braid is made flat and straight by heating and applying tension to both sides so that the weft width of the braid is uniform Kinds of machinery and equipment.

The main application of woven stenter frame is for all kinds of woven fabrics, such as cotton, silk and wool, etc. These natural fiber fabrics. Thus, to make the fabric smooth and tidy, and at the same time, reduce the degree of deformation of the fabric during cutting or sewing.

3.JPG

2. Basic and major components

Guiding device: Mainly used to guide the braid smoothly into the knit tenter. It is composed of three parts: a guide roller, a suction cutter and a bracket with a roller.

Drafting device: In general, there are two types of cloth and needle boards, but in the woven stenter, the needle board is used. Its role is to fasten the fabric so that tension can be applied to it.

Heating device: It is open and closed both, according to the type of medium to choose. In the heating method, the general is for steam heating.

Ironing device: It is mainly used to eliminate the phenomenon of fringe on the edge of the cloth, which is realized by ironing the drum. At the same time, at high temperatures, the woven stenter frame stabilizes the fabric width and lightens its surface and increases its surface gloss.

Falling cloth device: Through the guide roller and other devices, the fabric into the roll and fall into the turnover car in order to enter the next process.

Electrostatic elimination device: its main role is to eliminate the static electricity on the braid, therefore, is through the tip discharge, or negative charge offset, etc., the fabric due to ironing friction generated static charge eliminated, thus, Can avoid the accumulation of static charge, so as not to affect the normal operation of the woven stenter.