textile hot air stentering machine operation requirements
Although the textile hot air stentering machine operation is relatively simple, the problems that need attention are relatively trivial, and the operation will affect the subsequent processing effect of the stenter. So as a user, we also need to pay attention to this part of the content.
In actual work, we must wear the guide cloth according to the requirements, and check the worn guide cloth to ensure correctness. Then we need to clean the textile hot air stentering machine first, especially pay attention to check the cloth rack and the front of the machine for dirt, and clean it in time. In addition, you need to check the needle clip for debris and clean it up. In addition, the site environment should be kept clean and hygienic.
After the inspection work is completed, we need to classify the fabrics to be produced according to the process conditions. Generally, the same process fabrics will be processed centrally. You should then check the process card and verify that it is correct. According to the processing requirements of different fabrics, the feeding tension of the textile hot air stentering machine, the width of the entire weft detection and the width of the tenter should be adjusted appropriately.
In the operation of the textile hot air stentering machine, we must ensure that the fabric is not damaged in any of the processing steps. That is to say, the integrity of the guide cloth should be ensured and it must be guaranteed to meet the processing requirements. If the guide cloth is found to be stained or damaged, it should be sorted out in time. If it needs to be replaced, it should be recorded.