Structure type and guiding device of knit fabric stenter

- May 29, 2019-

Knit fabric stenter is a kind of equipment in the textile printing and dyeing factory, which is used to stretch the fabric by heating and stretching the two sides, and to make the width of the latitudinal width uniform. Natural fiber fabrics such as cotton yarn, silk, wool, etc., because of their certain moist heat plasticity, in the printing and dyeing process, after scouring, drifting, dyeing, washing and other wet heat processing, the whole fabric is elongated in the warp direction, the weft direction is shortened, and the cloth surface is also The unevenness is achieved by the warming of the tenter and the application of the lateral drafting effect, so that the weft direction can be widened and uniform, the cloth surface is flat and beautiful, and the deformation of the fabric during the cutting and sewing process can be reduced.

Structure type of knit fabric stenter

There are many types of knit fabric stenter, but the basic structure is nothing more than the following combinations:

Guide for knit fabric stenter

It is used to guide the fabric smoothly into the tenter, usually consisting of a plurality of guide rolls, a suction device and a bracket with a roller.

Drafting device for knit fabric stenter

There are two kinds of cloth and needle board. Generally, the cotton cloth and the wool fabric are needle-plate type, and the silk cloth type is used to fasten the cloth surface, and it is convenient to apply tension to the two sides to stretch the cloth surface.www.xindoumachine.com