​Stenter machine ironing apparatus and cloth dropping device

- Apr 12, 2018 -

The heating device of the Stenter machine has two types of open type and drying type in the process of operation. In general, the stenter machine uses the open type for silk and the closed type for the cotton cloth, effective Heat by steam and spray to wet.

Stenter machine ironing apparatus

During the operation of the stenter machine, it will effectively pass through the needle board or the fabric drafted by the fabric. The edge of the equipment will have a phenomenon of unevenly curved flanks, effectively passing through the middle of the same steam. After ironing, this flounced edge will be eliminated, and at a higher temperature, the stretched width of the web can be relatively stabilized, and the ironing of the cloth can be even and smooth.

Stenter machine device

During the operation, it is effective to pass the tentered cloth through a series of guide rollers to roll the fabric into a roll or fall into the turnover car through the S-shaped swing cloth to enter the next process.

Stretcher static elimination device

The Stenter machine disperses the static electricity generated by ironing friction on the surface of the cloth by means of tip discharge or positive and negative offset to prevent the accumulation of static electricity and affect the worker's operation.

http://www.xindoumachine.com/