Some problems in the work of coating machine

- Sep 15, 2017 -

Many of the transmission parts of the coating machine will wear along with the work time, especially the coating machine dryer shaft head and roll paper roller bearing room These two parts are more prone to wear phenomenon. Our traditional repair methods are surfacing, thermal spraying, brush plating and so on, but it is not said that these repair methods can be coated machine thoroughly repaired, many times will often be due to surfacing because of the surface of some parts of the temperature of the coating machine can withstand the temperature, so that it is easy to make the coating machine deformation or crack, Even worse, shaft rupture occurs.

The second is to deal with electroplating plating coating when not too thick, so as to reduce pollution to the environment, of course, some applications will be limited. Now the development of science and technology is more and more rapid, then the above problems will naturally be more efficient with the passage of time to solve, we will gradually focus on those adhesion and compressive strength of the more powerful materials, so as to reduce the coating machine wear.

Now the coating machine is also very easy to cause the foundation damage when mixing the concrete, this is because the coating machine in the work of the corrosion, aging and equipment vibration factors such as the impact of the wear, and also to a certain extent on the concrete base and other parts of the damage, so that the fastening equipment bolts appear loose And even affect productivity.