The foam coating and laminating machine is a new type of coating machine. As we all know, with the continuous development and progress of the technology, the types and specifications of the coating machine are more and more abundant. So that the selection also provides a large free space for the user.
However, when using this foam coating and laminating machine, operators should not be careless, or not only will lead to efficiency reduction, but also even will cause a safety accident, bringing us a significant loss. In fact, the use of any device must also be careful, and pay attention to details. Let's take a look at the issues that need to be noted.
First of all, the operators of the foam coating and laminating machine must be trained and pass through the examination before they can do their work. Secondly, in the operation process, the operator must strictly abide by the equipment operating procedures requirements. Other personnel must not operate, or change the setting parameters.
Furthermore, in general, when the speed ratio between rolls is set, it is recommended that you stay it in the range of 1.3 to 1.5. In addition, the air heater can be activated only after the drying fan has been activated. And in adjusting the distance between the coating roll and back roll of the foam coating and laminating machine, it is necessary to use wiping off slurry on the coating roll without sticking the back roll as the basic principle. At the same time, it must be ensured that the two rollers are parallel to each other and the clearance is consistent.
It is also important to note that if the foam coating and laminating machine is adjusted, then after setting the specific parameters, you still need to press the imbedding button to work. When the work is stopped, pay attention to the inspection and cleaning, and keep the scene environment.
WUXI XINDOU DYEING&PRINTING MACHINERY CO.,LTD
Add：No. 15. Longtan Road , Qianzhou Industrial Area, Huishan District ,Wuxi City , Jiangsu Province , China .
Mob: 0086- 13961898880