PU fabric coating machine uses and operating procedures

- Oct 18, 2018-

At present, people can mainly use PU fabric coating machine to complete the coating production of PU/PA. Under normal circumstances, the transmission mode of PU fabric coating machine is controlled by a single motor variable frequency speed control system. The temperature of the whole machine is automatically controlled and is matched with a precision coating head. It belongs to a precision coating machine that can perform soft coating and hard coating.

 

As a user, we must ensure the safety of daily operation of the PU fabric coating machine. The following are the main contents:

 

Purpose: In production, the requirements for safe operation of the PU fabric coating machine should be clearly defined to ensure the operator's personal safety and the normal operation of the equipment.

 

Operation steps: When finishing the hygiene of the PU fabric coating machine, the staff should also pay attention to check the power supply, the circuit switch is normal, do not stick to the solvent, spill on the dangerous box such as the electric box, wire, etc.; then prepare the plastic cloth, When pulling the A-frame or box car, it is necessary to drive according to the specified route, and it shall not be straight and straight. When the guide cloth is put on, it shall be worn as far as possible when the machine is stopped. If it is necessary to wear cloth during the operation of the machine, the speed Must be controlled within 10y/min.

 

In particular, it should be noted that during the operation of the PU fabric coating machine, if there is a pressure roller on the coating head, the operating speed should be ensured, and it must not be run at a high speed in order to prevent excessive static electricity from generating sparks. Workers should not place their hand on a high-speed cloth so as to avoid the hand being brought into the press roll and causing crushing.

 

In addition, during the operation of the PU fabric coating machine, the staff should pay close attention to whether the exhaust motor is operating normally, and must ensure that exhaust gas generated inside the PU fabric coating machine is eliminated in time.

http://www.xindoumachine.com/