Model design and working principle of silicone coating machine for fiberglass fabric

- Jul 21, 2018 -

The silicone fiberglass cloth coating machine is mainly used in the process of screen printing. The working principle of the automatic coating machine is the same, but its performance will be effective according to its different models and different manufacturers. And different. The silicone fiberglass cloth coating machine is equipped with a device capable of clamping the frame on the vertical frame.

 

The front and back of the screen area of the silicone coating machine for fiberglass fabric mainly adopts its horizontal coating mechanism. The coating mechanism is mainly composed of the coating tank and the mechanical parts or pneumatics that control the angle and pressure of the coating tank. Component composition.

 

The two ends of the silica gel fiberglass coating machine are mounted on the vertical support arm of the coater. When the operation is carried out, the belt, the chain and the cable drive are mainly used, so that the coating mechanism can be moved up and down along the wire mesh. Surface coating. The transmission is connected to a servo or variable frequency motor for smooth operation and precise control of the position of the coating mechanism.

 

The silicone coating machine for fiberglass fabric effectively loads the cleaned and stretched mesh screen from the front of the coating machine before coating. Under normal circumstances, the model can also be loaded into the screen from the side. Among the models with large-format frame design, side-loading is more common, because the frame is large and heavy, and the side-mounted plate can make the lifting amount and the moving amount smaller. When the automatic screen coater is operated online with other automatic screen processing equipment (such as cleaning equipment, recycling equipment, drying equipment and developing machine), it is more convenient to mount from the side.

http://www.xindoumachine.com/