Maintenance method and maintenance requirements for PVC coating machine

- Sep 10, 2018-

In the process of operation, the PVC coating machine should have appropriate maintenance devices around it, and it should be operated under the environment of excellent insulation and maintenance board surface. If there is any problem with the development of the machine, it is necessary to contact relevant professionals in time. Can not be disassembled separately.

The operating temperature of the PVC coater should not be operated at temperatures below 0 degrees Celsius or above 50 degrees Celsius. It is best not to use the coater in the absence of fast moving air when using it. In the time of the glue replacement, it should be attended before at least 1/3 of the hot melt adhesive in the hot melt cooker. Try to avoid the time when the hot melt adhesive is not hot melted.

Maintenance method of PVC coating machine

1. The cleaning section is preferably stainless steel requiring clean and waterless lines.

2. The transmission should be stable, the speed can be adjusted, and the inverter is more than three.

3. The plate pressure requires a good piece, debris.

4. The PVC coating machine can evenly transfer the glue. Before coating, the clean, stretched mesh screen is loaded from the front of the coating machine, and some models can also be loaded into the screen from the surrounding surface. In the models planned for large-format frame, the surrounding surface plate is more common, because the frame is large and stupid, and the surrounding surface is installed, which can make the lifting amount and the moving amount smaller. When the automatic screen coater is operated online with other automatic screen processing equipment (such as cleaning equipment, recycling equipment, drying equipment and developing machine), it is more convenient to install the paper from the surrounding surface.

https://www.xindoumachine.com/