Maintenance knowledge of textile hot air heat setting stenter machine

- Jun 20, 2019-

Under normal circumstances, whenever the textile hot air heat setting stenter machine is running for a period of time, it needs to be lubricated and maintained. At the same time, due to the different lengths of operation, the specific measures taken are not the same. Generally speaking, after the textile hot air heat setting stenter machine has been running for 60 hours, the staff needs to open the cover plates on the heating compartment to clean and lubricate the mechanical transmission parts.

 

Mainly refers to the cleaning of the main chain and gears of the textile hot air heat setting stenter machine, and then the lubrication of the gear shaft and other operating parts. When the working time of the equipment is over one hundred hours, the staff needs to open the cover of the heating compartment for inspection, mainly to check the details of the wires, circuits, heating pipes and connecting parts.

 

In addition, since the textile hot air heat setting stenter machine is an electric heating device, when the chemical fiber fabric is processed, high static electricity may be generated due to factors such as environment, air and humidity. To ensure safety, ensure that the body is installed with a reliable grounding wire. At the same time, it should be noted that the diameter of the grounding wire must not be 3 square millimeters. In addition, repairs or inspections should not be carried out during the operation of the stenter equipment to prevent burns.

 

After reminding everyone, you should pay attention to the temperature of the textile hot air heat setting stenter machine during daily work. If the temperature exceeds 240 ° C, it may cause an open flame. Therefore, it is not allowed to place flammable and explosive materials around the tenter setting machine, and the relevant fire extinguishing tools should be prepared at the same time. www.xindoumachine.com