Knitted fabric stenter main drive system maintenance instructions

- Jul 25, 2018-

As an operator, it is necessary to carefully read the specifications of the knitted fabric stenter equipment and the accessories, and pay special attention to the use and maintenance of the main drive system. During the use of the main drive system of the knitted fabric stenter, the reducer is not filled with lubricating oil at the factory. Before starting the machine, please fill in the requirements of the reducer manual. After 150-400 hours of operation, the lubricant is replaced. The replacement cycle is about 4000 hours.


During the later period of use, care should be taken to check the weight and quality of the oil regularly. In operation, the gearbox housing of the knitted fabric stenter should not be hammered by gravity to avoid damage. And pay attention to regularly check whether the connecting bolt is loose, oil seal, bearing shaft is normal.


In addition, care should be taken to ensure that there is sufficient lubricant in the frame of the knitted fabric stenter. Since the protective cover is sealed, the inspection window should be opened periodically to see if the gear tooth shape is damaged. The rotary encoder with speed control and gauge length is installed in the motor. When repairing and disassembling, be careful not to damage or collide. It should be regularly checked to ensure it is sensitive and reliable.