Keep the canvas coating machine conveyor belt clean method

- Nov 02, 2017 -

In the actual use of canvas coating machine process, we not only ensure that the operation is reasonable, but also need to pay attention to ensure its cleanliness, especially the conveyor belt cleanliness. This is because the cleanliness of the conveyor belt will directly affect the quality of the product.

 

In addition, in order to ensure the safety of production, in practical applications, we not only make the canvas coating machine equipment for grounding, but also need to install a separate leakage switch. In addition, it is necessary to maintain the cleanliness of the equipment and conveyor belt. Therefore, before each boot, you need to use a compressed air machine inside and outside the cabinet dust and wire debris, etc to clean up.

 

It is important to note that it is not necessary to place debris on the workbench and outer cover of the canvas coating machine to prevent it from being damaged by being fed into the conveyor belt. Before starting the power, you should first check the power supply is good, and the temperature set in the range of 50 to 60 ℃, remember can not exceed 80 ℃.

3.JPG

In addition, the user also need to pay attention to observe the operation of the canvas coating machine equipment, and complete the upper and lower  with the need to adjust the conveyor belt after the speed, and the actual situation with the appropriate adjustment of  required temperature.

 

In short, the canvas coating machine equipment operating speed, temperature and pressure and other parameters, need to be combined with the actual production requirements to be adjusted. During high temperature operation, no sudden shutdown. If you encounter an accident, you should use a manual installation to keep the conveyor belt slow rotation, so as to avoid damage to the conveyor belt due to high temperature.

 

Of course, during the day-to-day work, the staff also need to clean the conveyor belt of canvas coating equipment regularly , it is best to use the original match with a special conveyor belt cleaning agent, so as not to affect its service life. At the same time also need to check the transmission parts and lubrication, to ensure long-term canvas coating machine running smoothly.