The latex mattress is produced through the latex mattress production line. The specific process is as follows: the rubber is first sliced by a rubber mixer, and then sliced and sent to a sol cylinder and a gasoline mixed sol. After the sol is emulsified and prepared, the latex intermediate tank is pumped. The rubber solution dissolved in gasoline is fed from the top of the distillation column, heated by steam distillation, and the light component gasoline is heated to a gas phase, and the gasoline gas is mixed and cooled by cold water in the oil and gas cooler.
The oil-water mixture is then transferred to the oil-water separator and the oil moisture layer. The upper layer of gasoline is recovered, and the lower part of the water is pumped to the cooling tower for cooling. After cooling, the gas gasoline of the distillation tower is cooled. The distillation tower is sent to the latex mixing tank according to its own pressure, and then the mixture is centrifuged to separate the pillow raw material latex. After being toned and filtered, it is ready for use.
The mattress model is first cleaned by acid and alkali and washed with water. The washed model is first immersed in hot water and heated to the immersion coagulant and dried for dipping. After dipping, the oven is initially dried, added with fiber inner sleeve, washed with hot water and then sent to the oven for vulcanization and drying. After the mattress is released from the mold, it is inflated, low-temperature shaped, dried at medium temperature, washed, dehydrated, dried and then packaged for delivery to the finished product warehouse.www.xindoumachine.com