Heating and ironing device for textile hot air heat setting stenter machine

- Jan 03, 2019-

The improved method of precise control of the drying room temperature of the  textile hot air heat setting stenter machine is designed. An embedded system based on ARM is designed. The composition and control principle of the system design a remote monitoring system based on BOA server. Inserting Flash animation into the webpage solves the real-time refresh and dynamic depiction of the data of the monitoring system in the browser, and realizes the network monitoring of the web server measurement and control system connected to the Internet by the browser.

Heating device for  textile hot air heat setting stenter machine

The textile hot air heat setting stenter machine has two types: open type and oven type. Generally, the cotton cloth is closed type, the silk is open type, heated by steam and sprayed to the wet.

Ironing device for  textile hot air heat setting stenter machine

After the fabric is drawn by the needle plate or the cloth, the edge of the cloth will have a rugged ruffle. After the ironing with the steam in the middle, the flange will be eliminated and at a higher temperature. It can also stabilize the size of the spreaded door, and at the same time, it can make the cloth ironing more flat and bright.

https://www.xindoumachine.com/