The natural fiber fabrics such as cotton yarn, silk, wool, etc. of thestenter for knitted fabric have a certain degree of moist heat plasticity. After dyeing, bleaching, dyeing, washing and other wet heat processing, the whole fabric is elongated and wefted. Shortening, the cloth surface is not flat, and the latitude is widened and uniformed by the warming of the tenter and the lateral drafting effect is applied, the cloth surface is flat and beautiful, and the fabric is also reduced during the sewing process. The deformation.
The guiding device of the stenter for knitted fabric is mainly used for guiding the fabric smoothly into its tenter during use. Generally, it consists of a plurality of guide rollers, a suction device and a bracket with a roller. There are two kinds of cloth and needle board. Generally, the cotton cloth and the wool fabric are needle-plate type, and the silk cloth type is used to fasten the cloth surface, and it is convenient to apply tension to the two sides to stretch the cloth surface.
The stenter for knitted fabric the opportunity to pass the stretched fabric through a series of guide rollers, and the fabric is rolled into a roll or passed through the S-shaped swinging cloth into the turnover car to enter the next process. Through the tip discharge or positive and negative offset, the static electricity generated by the ironing friction on the cloth surface is dissipated to prevent static electricity accumulation and affect the worker's operation.www.xindoumachine.com