Frame design and surface coating of bulletproof UD fabric production line

- Jul 23, 2018-

Both ends of the bulletproof UD fabric production line are mounted on the vertical support arm of the coater. During operation, the belt is mainly driven by the belt 'chain and cable. This allows the mechanism of the bulletproof UD fabric line to move up and down. The surface of the screen is coated. The transmission is connected to a servo or variable frequency motor for smooth operation and precise control of the position of the coating mechanism.

  

The bulletproof UD fabric production line will effectively load the clean, stretched mesh version from the front of the front, and some models can also be loaded into the screen from the side, in the model designed for large format frames. Side loading is more common, because the frame is large and bulky, and the side loading can make the lifting amount and the moving amount smaller.

  

The bulletproof UD fabric production line is installed regardless of the screen version. Once the screen is in the correct position, the starting clamp or the mechanical clamping device is closed and the screen is locked. In order to make the operation more convenient, many models have pedals to control the folder movement, and the operator can free up his hands to control the screen.

http://www.xindoumachine.com/