Filter cloth stenter machine setting and processing requirements

- Apr 13, 2019-

The filter cloth stenter machine needs to click the tenter chain control button to enter the chain control interface during the operation. When performing the operation, input the width according to the process requirements on the process card and confirm, according to the process card, find the cloth to be processed and push it to Connect the guide cloth to the cloth, and turn the Huagong material into the slurry tank (20L before draining).

 

The filter cloth stenter machine rolls off the package or the car according to the organization of the cloth to be processed and the process requirements. Set the parameters of each part, and preset the fast/medium speed in the weft feeder according to the latitude of the cloth to be processed, and the left fast/right fast. The bell is notified to enter and exit the cloth and ready to be turned on. After the ringback, press the power button, the acceleration indicator flashes, set the speed required by the process and confirm, and click the accelerator button to automatically increase the speed to the process speed.

 

The filter cloth stenter machine needs to click the number box showing the temperature in the oven simulation icon to enter the heating window, click the heating total to set the heating temperature, or set the heating temperature of each oven separately. When the heating temperature is below 90 degrees, click the small fire icon to heat it. When the heating temperature is above 90 degrees, click the big flame icon to heat and confirm.

https://www.xindoumachine.com/