Brief introduction to the technical characteristics of Fabric Stenter

- Nov 07, 2017-

On the current level of technology, in fact, when dealing with a variety of fabrics, not only effectively improve the quality of printing and dyeing, but also can effectively control the overall performance of the fabric. However, the fabric in the dyeing and finishing, due to the impact of a larger tension, so there will be some deformation, this time on the need for Fabric Stenter over the feed technology help.

 

Next, we will discuss the content of this aspect, hoping to help everyone. In fact, in the use of Fabric Stenter in the process, we need to overcome the unstable state of the fabric as much as possible, so that its size maintain stability. Because of this, in the process of tiling finishing, need to properly adjust the speed of the cloth, which is over feeding. Usually if the speed of the cloth is greater than the speed of the time is over the situation.

3.JPG

If it is done in this way, the warp yarns of the fabric can be retracted after the treatment, and the weft density and the weight of the fabric can be increased, and the shrinkage is reduced. On the contrary, if the speed of the cloth is less than the speed of the fabric stenter, this situation belongs to the overtake. At this time the fabric will be elongated, weft down, weight reduction, and by the shrinking larger.

 

In order to facilitate our understanding, here we will enumerate an example to illustrate. For example, in order to use the fabric stenter to eliminate the vertical stretch of the fabric dyeing process to meet the customer's requirements, then at this time should be more pre-fixed on the needle board.

 

And then the staff will need to be based on specific processing requirements to adjust the fabric stenter of the size of the super-feeding, and then in the high-temperature stereotypes, so that you can eliminate the amount of vertical stretch. In short, all kinds of fabric finishing process can not do without the help of fabric stenter.